77-3408-3405-50004–0100

binder / M8 A-Coded (768, 718 Series)

4 Way M8 (A-Coded) Cable Assembly, Straight Male to Angled Female, 1m Cable with Black PUR Jacket, IP67 (718 Series)

Image may be representative of a range of products, see literature to confirm

Available Downloads

Technical Specification

Part Number77-3408-3405-50004–0100

Product TypeCable Assembly

Brandbinder

Connector SeriesM8 A-Coded (768, 718 Series)

Cable Assembly TypeDouble Ended

Cable Jacket ColourBlack

Cable Jacket MaterialPUR

Cable Length1m

Cable Operating Temperature-25 to +70°C (fixed), -5 to +70°C (flex)

Conductor Gauge0.25mm²

Connector Operating Temperature-25 to +85°C

Connector Type 14 Way Male

Connector Type 24 Way Female

Contact PlatingGold

Coupling Area MaterialMetal

Current Rating4A

Voltage Rating60V

Electrical NotesSee literature for derating curves

Degree of Ingress ProtectionIP67

EMC ShieldNo

Gender of InsertMale, Female

Housing MaterialPlastic

Keyway/Coding TypeA-Coded

Locking SystemScrew

Min. Mechanical Mating Cycles100

Number of Conductors4

Shell TypeCable Connector

About this Series

Robust and compact circular connectors from one of the industry’s most trusted brands

In brief:

Compact circular connector system with industry standard IEC 61076-2-104 M8x1 screw locking interface.

M8 A-Coded connectors offer pin-counts from 3 to 12 with a current carrying capacity of up to 4A per contact.

The series caters for cable OD’s of up to 5mm, has a wire gauge max. of 0.50mm² and is capable of offering IP65 & IP67 ingress protection in mated state or with the use of a protection cover.

Binder M8 Sensor & Automation Connectors (768, 718)

The binder M8 or 768/718 series is a range of sub-miniature circular sensor and automation connectors with screw lock coupling.

The connectors are available in 3-12 way options and offer IP65 & IP67 environmental protection in mated condition.

The M8 series is an engineer’s favourite as it balances a neat and compact shell with a variety of pin counts, shell variants and termination methods.

Field attachable cable connectors are available in solder cup, screw and IDC termination and with the standard plastic shell and metal coupling ring or as a full metal body with excellent EMC shielding properties. Binder also boast a vast range of moulded cable options in both PVC or PUR jacket, with straight or angled orientation and with standard or stainless steel coupling ring.

Panel receptacles are also available in many varieties including options with front or rear fastening, with solder cup, dip solder or pre-terminated wires and also shells with or without shielding sheet.

For a more detailed description of this connector series please see the manufacturers brochure which is available to download above.

For a personalised quotation on any of the part numbers seen in this range please complete the 'Quick Quote' form or simply call us on 01744 815001

Technical expertise is just a click away. For rapid service & personalised support, complete the following form or call 01744 815 001