933098100

Hirschmann / M12 A-Coded Cable Connectors (E-Series)

4 Way M12 (A-Coded) Male Cable Connector with Screw Contacts, 4-6mm Straight Cable Entry, IP67 (ELST 4012 PG7)

Image may be representative of a range of products, see literature to confirm

Available Downloads

Datasheet

Brochure

Quick Quote

Technical Specification

Part Number933098100

Product TypeConnector

BrandHirschmann

Connector SeriesHirschmann M12

ApprovalsNA

Backshell IncludedYes

Body OrientationStraight

Connector TypeCable Connector

Contact PlatingTin

Contacts IncludedYes

Coupling Area MaterialMetal

Current Rating4A

Voltage Rating230 AC/DC

Electrical NotesSee literature for derating curves

Degree of Ingress ProtectionIP67

EMC Shielding CapabilityNo

Gender of InsertMale

Housing MaterialPlastic

Keyway/Coding TypeA-Coded

Locking SystemScrew

Min. Mechanical Mating Cycles20

Max. Wire Gauge/Cross-Sectional Area0.75mm²

Min. Cable Entry (mm)4

Max. Cable Entry (mm)6

Number of Ways4

Operating Temperature-20 to +90°C

Positive Earth (PE)No

Shell sizeNA

Termination Method/TechnologyScrew

About this Series

High-quality products for the automation industry, delivered at great value

In brief:

Compact circular connector system with industry standard IEC 61076-2-101 M12x1 screw locking interface.

M12 A-Coded cable connectors offer pin-counts of 4 and 5 with a current carrying capacity of up to 4A per contact.

The series caters for cable OD’s of up to 8mm, has a wire gauge max. of 0.75mm² and is capable of offering IP67 ingress protection in mated state.

Challenges are a routine matter for the circular connectors of the E-series M12: inductive or capacitative proximity switches, photoelectric barriers, flow-monitoring devices, pressure switches, limit switch connections, photoelectric barriers,

AS interface bus components and field bus components – the best is just good enough. And in order to ensure a particularly long life, Hirschmann circular connectors are protected against dust
and moisture and are resistant to many oils and chemical substances.

The ergonomic design of E-series makes handling easier; as a result, the connection of sensor and actuator technology in automation systems as for example in automatic installation units and machine tools can be done quickly and promptly.

Our engineered design prevents the accidental unscrewing of the coupling nut. This provides an additional advantage in terms of safety in all fields of application that are subject to high vibration loads, for example in conveyor belt equipment and automatic punch presses.

Hirschmann circular connectors are used in all sensor and actuator device applications in automation technology – particularly where
the risk of vibrations is especially high.

The E-series M12 with plug design as per IEC 61076-2-101 (Ed. 1) can be obtained in the design type with screw locking M12x1.

For a more detailed description of this connector series please see the extract from the manufacturers brochure which is available to download above.

For a personalised quotation on any of the part numbers seen in this range please complete the 'Quick Quote' form or simply call us on 01744 815001

Technical expertise is just a click away. For rapid service & personalised support, complete the following form or call 01744 815 001